Martin Logan Dynamo 700W
Martin Logan Dynamo 700W --- Building on the success of the original Dynamo, our designers went on to create the compact, powerful Dynamo 700w. Featuring a high-current 300-watt RMS, 600-watt peak amplifier and 10-inch cone driver, the Dynamo 700w delivers deep, tight, effortless bass for home theater or stereo music. Its standard down-firing configuration quickly (and easily!) converts into a front-firing setup for those who prefer a "hidden" installation. Finishing touch - an included wireless transmitter and receiver for bass aficionados who prefer a clean, minimalist look in the room, with no cables in sight.
Although correct placement plays a key role in optimizing subwoofer performance, sometimes it imposes the inconvenience (not to mention unsightliness!) of running long lengths of cable through walls, along baseboards or under floors and carpets. To solve the problem, the Dynamo 700w incorporates a wireless receiver (digital RF transmission) for use with the included SWT-2 MartinLogan Subwoofer Wireless Transmitter in which case, cable clutter also becomes a moot point!
The Dynamo 700's advanced-technology driver pairs a high-power magnet structure with a 10-inch diaphragm to deliver huge excursion and sound output while perfectly preserving the tiniest bass detail... and all without a hint of distortion. The exceptional damping properties of the cone material also ensure the smooth, non-resonant response necessary for truly seamless blending with MartinLogan electrostatic panel and Folded Motion™ driver technologies.
The Dynamo 700w's ultra-efficient high-power amplifier uses variable audio tracking power supplies to drive its class AB output stage. With lower distortion and less noise than typical Class D switching amplifiers this advanced design allows the amplifier to operate at much higher efficiencies than a typical class AB amplifier, delivering a true 300 watts of continuous power.
An energy-conscious design, the Dynamo 700w's amp consumes less than a single watt in Standby mode.
To maximize performance when installed inside of a cabinet or other discrete installation, the Dynamo 700w's standard down-firing configuration easily converts into a front-firing orientation-no tools required! A grill cover and 90 degree RCA adaptors are provided for use in front-firing applications.
An IME filter is derived from the inverse of the unfiltered driver response. Precision IME filtering yields extremely accurate low-frequency response - far superior to that provided by the simple second-order high-Q filters typically found in subwoofers in this price range.
A good sealed system will typically exhibit less transient-blurring group delay while maintaining smooth, consistent response regardless of music or movie source material. On the outside, the Dynamo 700w's cabinet is constructed from the finest composite material for acoustic integrity. Inside, critically placed structural cross-bracing acts an excellent baffle for the woofer while the added rigidity keeps cabinet-induced resonances and non-linearities to inaudible levels.
Comprehensive connection options, low-pass filtering and phase control make integrating the Dynamo 700w subwoofer into a multi-channel home theater or stereo music setup simple and seamless. The main left/right line-level inputs feed into a precision low-pass filter with a cut-off frequency variable from 35 to 120 Hz. For systems in which a surround processor supplies the crossover, the Dynamo 700w offers an LFE input that bypasses its internal filters.
The Dynamo 700w comes with custom ETC spikes which can be used in place of the feet to enhance stability on thick carpets, or create tighter coupling between subwoofer and floor to enhance overall sound quality.
Features and Specs:
Frequency Response: 24–200 Hz ±3dB; Anechoic through LFE effects input
Low Pass Filter Frequencies: 35–120 Hz
Low Frequency Transducer: 10" (25.4cm) high excursion, poly cone with extended throw drive assembly; sealed non-resonant cabinet design
Amplifier: 300 watts (600 watts peak)
Impedance: Line level RCA: 20,000 Ohms
Audio Controls: Low Pass Filter Switch: Bypass (LFE In), Variable (Left and Right In)
Phase Controls: 0°, 90°, 180°
Inputs: Left & Right/LFE RCA Line Level
Power Draw: Standby: 1W Idle: 15W Max: 400W
Wireless Capability: Built-in receiver and included SWT-2 transmitter
» Resolution: 16-bit
» Sampling Rate: 48kHz
» Wireless Band: 2.4GHz uncompressed digital self-sensing design constantly adjusts for best connection.
» Error Checking: Bidirectional feedback constantly monitors integrity of data stream.
» Antenna: Internal
» Subs Per Transmitter: One
» Maximum Wireless Range: 30–40 feet (10–12.5 meters)
Weight: 26.5lbs. (12kg) each
Overall Dimensions (HxWxD): Down-Firing Orientation 12.54 x 11.69 x 12.53 (31.9cm x 29.7cm x 31.8cm)
Front-Firing Orientation 13.47 x 11.69 x 12.31 (34.2cm x 29.7cm x 31.3cm)
MSRP: $695 ea.
If you are interested in this product, have questions, or want to schedule an audition, please call 1-714-630-4100.