© 2017 |

714-630-4100

McINTOSH MCD301 CD PLAYER

The McIntosh MCD301 SACD/CD Player delivers breathtaking fidelity from both standard compact discs and SACD’s, “raising the bar” for both technical and sonic performance. Topping the list of features is a new, super-quiet SACD/CD drive mechanism that is completely enclosed in a die-cast, wrap-around chassis for resonance free operation. A die-cast aluminum disc tray lends a special touch of quality that you will appreciate every time you load a disc.

Specs:

 

• Number of Channels: 2

• Analog Audio Outputs: Unbalanced and Balanced stereo,

   Fixed and Variable

• Fixed Output Level: 2.0Vrms Unbalanced, 4.0Vrms Balanced

• Variable Output Level: 0 - 6.0Vrms Unbalanced,

   0 - 12.0Vrms Balanced

• Output Impedance: 600 ohms Unbalanced and Balanced

• Frequency Response: 4Hz to 40,000Hz, +0.5, -3dB (SACD),

   4Hz to 20,000Hz, ±0.5dB (CD)

• Signal To Noise Ratio: Better than 110dB (A-weighted)

• Dynamic Range: Better than 100dB

• Total Harmonic Distortion: 0.002% @ 1000Hz (SACD),

   0.003% @ 1000Hz (CD)

• Channel Separation: Better than 98dB (1,000Hz)

• Headphone Output Impedance: 100 ohms

• Digital Output Sample Rate: 16-Bit/44.1kHz

• Digital Coaxial Output: 0.5V p-p/75 ohms

• Digital Optical Output: -15dbm to -21dbm

• Fixed Outputs Unbalanced: 1 Stereo

• Fixed Outputs Balanced: 1 Stereo

Call for price

 

 

If you are interested in this product or have questions, please call 1-714-630-4100.  

 

• Variable Outputs Unbalanced: 1 Stereo

• Variable Outputs Balanced: 1 Stereo

• Digital Coaxial Output: 1

• Digital Optical Output: 1

• Rear Panel IR Sensor Input

• Rear Panel Data Input

• Power Control Input

• Power Control Output

• Disc Formats: CD, SACD, MP3 and WMA

• Disc Capacity : 1

• Laser Type: Twin Beam

• Laser Beam Wavelength: 650nm (SACD), 790nm (CD)

• Laser Power: CLASS IIa/CLASS I

• Standby Power Requirement: <1.0 watt

• Dimensions: 17-1/2" W x 6" H x 16-1/2"D

• Weight: 28.2 lbs

 

Note: When the Disc Tray is opened, the panel clearance required in front of mounting panel is 6-3/4 inches.